ABB AutoLink 설치 지침 - 페이지 5

{카테고리_이름} ABB AutoLink에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB AutoLink 11 페이지. 15kv, 27kv, 38kv
ABB AutoLink에 대해서도 마찬가지입니다: 지침서 (12 페이지)

TEHI95094 – rev. 1

The accompanying documents inserted in the shipping packing are:

Other documents which are sent prior to shipment of the apparatus are:

4 Storage

When a period of storage is foreseen, our workshops can (on request) provide suitable

packing for the specific storage conditions.

On receipt the apparatus must be carefully unpacked and checked as described in

Chapter 2 of this manual.

If immediate installation is not possible, the packing must be replaced, using the original

material supplied.

Should the original packing not be available and immediate installation is not possible,

store in a covered, well-ventilated, dry, dust-free, non-corrosive ambient, away from any

flammable materials and at a temperature between -5°C and +45° C.

In any case, avoid any accidental impacts or positioning which stresses the structure of

the apparatus.

The AutoLink Electronic Sectionalizer is a protective device that operates at a permanent

failure in the distribution line. It must be used together with a backup recloser. Please

take note that the AutoLink is not a fuse tripping device, therefore it cannot be used as a

protective device by itself.

The AutoLink Electronic Sectionalizer is designed ONLY to protect electrical equipment

and NOT for saving people from accidents or electrocution when contacting energized

circuits.

Correct installation is of primary importance. The manufacturer's instructions must

be carefully studied and followed. It is good practice to use gloves for handling the

pieces during installation.

The following standards must be taken into particular consideration during installation and

service:

Test Certification

Packing List

Order confirmation

Original shipping advice notes

Any drawings or documents referring to special configurations/conditions

5 / 11