Yamaha AG-Stomp 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Yamaha AG-Stomp에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AG-Stomp 32 페이지. Yamaha accoustic guitar/pre-amplifier owner's manual
Yamaha AG-Stomp에 대해서도 마찬가지입니다: 서비스 매뉴얼 (45 페이지), 패치 목록 (1 페이지), (네덜란드어) 매뉴얼 (32 페이지)
페이지 인쇄
Connections
Before making any connections to any of the AG-Stomp's INPUT and/or OUTPUT jacks,
make sure that the power on the AG-Stomp and all other devices is turned OFF to prevent
electrical shock or damage to the devices.
I Connecting the Power
Use the supplied power adaptor (AC-10) to operate the AG-Stomp.
1. Make sure the AG-Stomp's Power Switch (STAND-BY) is in the OFF
position (
).
2. Connect the power adaptor's plug to the AC IN jack on the AG-Stomp.
3. Connect the power adaptor to an electric outlet.
Only use the supplied AC-10 power adaptor to power the unit.
The use of any other power adaptor may cause damage, over-
heating or fire, which can be very dangerous.
Make sure you use the proper AC voltage as indicated on the
power adaptor.
Never use the supplied power adaptor AC-10 with any other
device.
I Connecting a Mixer or Amplifier
1. Use the supplied TRS-XLR converter cable to convert the AG-Stomp's outputs (balanced TRS) to bal-
anced XLR outputs.
2. Use a commercially available PA type TRS phone cable, to connect the AG-Stomp's output jack to the
balanced inputs of a mixer, power amplifier, etc.
3. When a monaural phone cable is used, connections will be unbalanced.
Monaural Phone Cable
To realize the AG-Stomp's full potential, we recommend using it in stereo.
10
To the AG-Stomp's OUTPUT
L/MONO, R Jacks
TRS-XLR Converter
Cable (supplied)
XLR Cable
PA Type TRS Phone Cable
OFF (
)
Electric
Outlet
* The AC adaptor's shape will vary
according to the country to which
the device is shipped.
Mixer, Power Amplifier, etc.
Balanced XLR Output
Balanced TRS Output
Unbalanced Output
Power Adaptor
AC-10
1: Ground
2: Hot
3: Cold
T: Hot
R: Cold
S: Ground