Yamaha AG-Stomp 서비스 매뉴얼 - 페이지 32

{카테고리_이름} Yamaha AG-Stomp에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AG-Stomp 45 페이지. Yamaha accoustic guitar/pre-amplifier owner's manual
Yamaha AG-Stomp에 대해서도 마찬가지입니다: 소유자 매뉴얼 (32 페이지), 패치 목록 (1 페이지), (네덜란드어) 매뉴얼 (32 페이지)

페이지 인쇄
Yamaha AG-Stomp 서비스 매뉴얼
AG-Stomp

ERROR MESSAGES

If an error occurs during operation, one of the following error message numbers will appear in the display.
Stop operation of the AG-Stomp and follow one of the solutions described below.
E1
: MIDI Receive Buffer Full
CAUSE:
SOLUTION: Try reducing the amount of data being sent, or break the data into smaller blocks.
E2
: Communication Error.
CAUSE:
SOLUTION: Check all connections, etc. and try again.
E3
: Bulk Receive Check Sum Error.
CAUSE:
SOLUTION: Check all connections and transmitted data, and try again.
E4
: Bulk Receive Data Abnormality.
CAUSE:
SOLUTION: Check all connections and transmitted data, and try again.
32
Too much MIDI data is being received and the buffer is full
An abnormality is detected during MIDI communications.
The check sum does not match the received MIDI bulk dump data.
An abnormality is detected while receiving the bulk dump.