Yamaha DG-Stomp 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha DG-Stomp에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DG-Stomp 32 페이지. Guitar pre-amplifier with effects
Yamaha DG-Stomp에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 서비스 매뉴얼 (43 페이지)

페이지 인쇄

Nomenclature

!5 Modulation Group Effect Buttons

(CHORUS/FLANGER/PHASER/ROTARY/

TREMOLO)

These buttons set the type of Modulation Effect to

be used. The selected effect's lamp will light.

A secondary parameter for the effect can be set by

turning the SPEED or DEPTH knob while holding

the button of the currently selected effect.

!6 Speed Knob (SPEED)

Sets the Speed parameter and a secondary param-

eter of the Modulation Group's Effects.

!7 Depth Knob (DEPTH)

Sets the Depth parameter and a secondary param-

eter of the Modulation Group's Effects.

!8 Delay Group Effect Buttons

(DELAY/TAPE ECHO)

These buttons set the type of Delay Effect to be

used. The selected effect's lamp will light.

Foot Switch Section

@4 Foot Switches 1, 2, 3

According to the settings in the Utility Mode (

23), the switches can be used as for the following

functions.

• Selects a patch (1/2/3) from the currently selected bank.

• Switches the effect blocks ON/OFF (1: Modulation Block, 2:

Delay Block, 3: Reverb)

!9 Time Knob (TIME)

Sets the Delay time.

@0 Feedback Knob (FEEDBACK)

Sets how many times the delay will repeat.

@1 Level Knob (LEVEL)

Sets the Delay's volume level.

@2 Reverb Group Effect Buttons

(SPRING/HALL/PLATE)

These buttons set the type of Reverb Effect to be

used. The selected effect's lamp will light.

@3 Reverb Knob (REVERB)

Sets the amount of Reverb that is added to the

sound.

@5 Bank Switch (TAP/BANK/TUNER)

page

• Tap the switch: Sets the Delay Time according

to the tempo at which the switch is tapped. (

page 20)

• Press the switch until the display flashes: Use

the foot switches 1-3 to change the Area/Group/

Bank. (

• Hold the switch until "

play: Enters the Tuner Mode. (

page 16)

" appears in the dis-

page 22)