Yamaha DG-Stomp Manual do Proprietário - Página 8
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Yamaha DG-Stomp. Yamaha DG-Stomp 32 páginas. Guitar pre-amplifier with effects
Também para Yamaha DG-Stomp: Manual suplementar (1 páginas), Manual de serviço (43 páginas)
Imprimir página
Nomenclature
!5 Modulation Group Effect Buttons
(CHORUS/FLANGER/PHASER/ROTARY/
TREMOLO)
These buttons set the type of Modulation Effect to
be used. The selected effect's lamp will light.
A secondary parameter for the effect can be set by
turning the SPEED or DEPTH knob while holding
the button of the currently selected effect.
!6 Speed Knob (SPEED)
Sets the Speed parameter and a secondary param-
eter of the Modulation Group's Effects.
!7 Depth Knob (DEPTH)
Sets the Depth parameter and a secondary param-
eter of the Modulation Group's Effects.
!8 Delay Group Effect Buttons
(DELAY/TAPE ECHO)
These buttons set the type of Delay Effect to be
used. The selected effect's lamp will light.
Foot Switch Section
@4 Foot Switches 1, 2, 3
According to the settings in the Utility Mode (
23), the switches can be used as for the following
functions.
• Selects a patch (1/2/3) from the currently selected bank.
• Switches the effect blocks ON/OFF (1: Modulation Block, 2:
Delay Block, 3: Reverb)
8
!9 Time Knob (TIME)
Sets the Delay time.
@0 Feedback Knob (FEEDBACK)
Sets how many times the delay will repeat.
@1 Level Knob (LEVEL)
Sets the Delay's volume level.
@2 Reverb Group Effect Buttons
(SPRING/HALL/PLATE)
These buttons set the type of Reverb Effect to be
used. The selected effect's lamp will light.
@3 Reverb Knob (REVERB)
Sets the amount of Reverb that is added to the
sound.
@4
@5 Bank Switch (TAP/BANK/TUNER)
page
• Tap the switch: Sets the Delay Time according
to the tempo at which the switch is tapped. (
page 20)
• Press the switch until the display flashes: Use
the foot switches 1-3 to change the Area/Group/
Bank. (
• Hold the switch until "
play: Enters the Tuner Mode. (
@5
page 16)
tu
" appears in the dis-
page 22)