Yamaha DSP-A590 소유자 매뉴얼 - 페이지 22

{카테고리_이름} Yamaha DSP-A590에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DSP-A590 27 페이지. Natural sound digital sound field processing amplifier

페이지 인쇄
Yamaha DSP-A590 소유자 매뉴얼
If you use the SLEEP timer of this unit, you can make this unit turn off automatically. When you are going to sleep while enjoying a
broadcast or other desired input source, this timer function is helpful.
Notes
The SLEEP timer can be controlled only with the remote control transmitter.
The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear
panel of this unit.
To set the SLEEP time
1
SLEEP
Indicates the SLEEP time.
SLEEP
l00
T
Flashes on and off continuously.
Whenever the SLEEP key is pressed, the SLEEP time will
change as follows.
120
The SLEEP timer is OFF.
(The indication before the SLEEP
key is pressed.)
After a while, the display returns to the indication before
the SLEEP timer is set, and the "SLEEP" indicator stops
flashing and lights up.
2
The unit will be turned off automatically at the selected
SLEEP time.
22

SETTING THE SLEEP TIMER

Press once or more to
select the desired
SLEEP time.
ms
(Minutes)
90
60
30
To cancel the selected SLEEP time
Press once or more so that the display returns to the indication
before the SLEEP timer is set. ("SLEEP" will go off from the
display.)
Note
The SLEEP timer setting can also be canceled by turning off
the power with the POWER switch or disconnecting the power
plug of this unit from the AC outlet.
SLEEP