Yamaha TX4n 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Yamaha TX4n에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha TX4n 24 페이지. Txn series
Yamaha TX4n에 대해서도 마찬가지입니다: 사양 (4 페이지), 소유자 매뉴얼 (24 페이지), 소유자 매뉴얼 (24 페이지), 소유자 매뉴얼 (24 페이지), 소유자 매뉴얼 (24 페이지)

페이지 인쇄

Basic Operation of the TXn

Panel Operations

About the Display

Shows an alert message if a problem occurs

or if a user-speciﬁed event occurs.

Shows the contents of the

selected screen.

Switching Screens

By pressing a function button you can move to the screen

indicated above that button. By pressing the [HOME] button

you can move to the HOME screen. By pressing the [EXIT]

button you can move to the screen one level above.

Editing the Parameters

Use encoders A and B to move to the parameter that you

want to edit, and use encoder B to edit the value.

• When you edit a parameter in the UTILITY screen,

NOTE

press the [ENTER] button to conﬁrm it after you ﬁnish

editing. A parameter that has not been conﬁrmed will

ﬂash. If you move the cursor or move to a different

screen without conﬁrming the parameter, your change

will not be applied.

Function buttons

[EXIT] button

Encoder A

[HOME] button

Shows the names of the screens

assigned to the function buttons.

[ENTER] button

Adjusting the Attenuator

When the display shows the attenuator (i.e., in the HOME

screen or the METER screen), you can use encoders A and B

to adjust each channel's attenuation.

• If the display shows a screen other than the HOME

NOTE

screen or METER screen, encoders A and B are used

to set parameters.

Attenuator

Displaying the Meter

To display the meter, access the HOME screen and press the

left-most function button (METER). You can change the

meter type by using the left-most function button (PREV)

and the right-most function button (NEXT).

Level meter

Encoder B

TX6n/5n/4n Owner's Manual