Clark CCS185C 운영 및 유지보수 지침 매뉴얼 - 페이지 11

{카테고리_이름} Clark CCS185C에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clark CCS185C 17 페이지. 185mm, 1200w circular saw

ADJUSTMENTS

DEPTH OF CUT ADJUSTMENT

1. Loosen the depth adjustment

screw.

2. Adjust the base plate until the

required depth of blade is

protruding through the base

plate.

3. Tighten the depth adjustment

screw.

NOTE: For optimum results, a full

tooth should just be visible

below the workpiece.

1. Loosen the bevel adjustment

locking screw.

2. Adjust the base plate to the

required angle (max 45

• Use the bevel scale as a guide

only, for accurate angles use a

protractor.

3. Tighten the bevel adjustment

locking screw to secure.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

)