Clark CCS185C Handleiding voor bediening en onderhoud - Pagina 11
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clark CCS185C. Clark CCS185C 17 pagina's. 185mm, 1200w circular saw
Pagina afdrukken
ADJUSTMENTS
DEPTH OF CUT ADJUSTMENT
1. Loosen the depth adjustment
screw.
2. Adjust the base plate until the
required depth of blade is
protruding through the base
plate.
3. Tighten the depth adjustment
screw.
NOTE: For optimum results, a full
tooth should just be visible
below the workpiece.
BEVEL ADJUSTMENT
1. Loosen the bevel adjustment
locking screw.
2. Adjust the base plate to the
required angle (max 45
• Use the bevel scale as a guide
only, for accurate angles use a
protractor.
3. Tighten the bevel adjustment
locking screw to secure.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
o
)
11