Clark & Clark Speciality Products P1060 설치 지침 - 페이지 2

{카테고리_이름} Clark & Clark Speciality Products P1060에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clark & Clark Speciality Products P1060 2 페이지. Self-triggering prop for mgb trunk lid or hood and mg midget trunk lid

페이지 인쇄

Hood Prop may be located on either side of the engine compartment, depending on model year.

Installation is the same on either side.

Problems?

Note how the bolt head must sit in the recess to avoid interference with the striker.

If your hood will not close, and it appears the prop is hitting the radiator shroud,

this is the true problem.

You may grind the bold head down for extra clearance, if desired.

#P1033, P1059, P1060

Note: MGB hood bracket may be bent inward,

or removed and reversed for added clearance.

Note: safety pin holes are provided on these props.

When in the open/latched position, a safety pin may

be inserted through the inner and outer channels to

prevent inadvertent unlatching of the prop (use this

in windy weather!).