Directed 403.CHRYSLER6 설치 매뉴얼 - 페이지 11

{카테고리_이름} Directed 403.CHRYSLER6에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed 403.CHRYSLER6 20 페이지.

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Wait until the LED turns ON solid red.

Note: To skip the transponder programming and use convenience features only, press the

programming button 5 times. When the LED turns ON solid orange, proceed to step 2.

Insert and turn the key to ON, OFF, then remove the key.

Insert and turn the key to ON once more.

Note: If the bypass was skipped, the LED turns ON solid orange for

3 seconds then shuts OFF. The programming is now complete.

When the LED starts flashing orange slowly, turn the ignition OFF, remove the module from

the vehicle and reconnect it to your computer. The web site will automatically recognize that

you are moving onto the second phase of the programming sequence.

Click on Submit Key2GO Request.

Once the configuration is completed, reconnect the module. The LED turns ON solid green for

3 seconds, then turns OFF.

You have successfully completed the module programming sequence.

403.CHRYSLER6 2.14 2014 Dodge/Ram 3500