Directed 403.CHRYSLER6 Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Directed 403.CHRYSLER6. Directed 403.CHRYSLER6 20 pagina's.

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Wait until the LED turns ON solid red.

Note: To skip the transponder programming and use convenience features only, press the

programming button 5 times. When the LED turns ON solid orange, proceed to step 2.

Insert and turn the key to ON, OFF, then remove the key.

Insert and turn the key to ON once more.

Note: If the bypass was skipped, the LED turns ON solid orange for

3 seconds then shuts OFF. The programming is now complete.

When the LED starts flashing orange slowly, turn the ignition OFF, remove the module from

the vehicle and reconnect it to your computer. The web site will automatically recognize that

you are moving onto the second phase of the programming sequence.

Click on Submit Key2GO Request.

Once the configuration is completed, reconnect the module. The LED turns ON solid green for

3 seconds, then turns OFF.

You have successfully completed the module programming sequence.

403.CHRYSLER6 2.14 2014 Dodge/Ram 3500