Directed 403.CHRYSLER6 설치 매뉴얼 - 페이지 5

{카테고리_이름} Directed 403.CHRYSLER6에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed 403.CHRYSLER6 20 페이지.

페이지 인쇄
Directed 403.CHRYSLER6 설치 매뉴얼

Pre-installation and application warnings

Firmware notes: This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
The optional Plug & Play THCHD3 (Rev. 1 to 2) T-Harnesses are sold sparately.
Š
The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.
Š
The keyless entry control on the OEM Key FOB used during Key2Go programming will not work while the vehicle is remote
Š
started.
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic
Š
connector.
Refer to the "Vehicle connections" section following the wiring diagram.
Š
General notes: This section highlights important information for this specific firmware.
The Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
[1]
The RAP Off connection is ONLY required if NOT supported in data.
[2]
5
403.CHRYSLER6 2.14 2014 Dodge/Ram 3500
©2022 VOXX•DEI LLC. All rights reserved.
THCHD3 (Rev. 1 to 2)
Keys required for
1
Keys required for
programming
operation
0