Directed DB3 403.KIA8 설치 매뉴얼 - 페이지 10

{카테고리_이름} Directed DB3 403.KIA8에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed DB3 403.KIA8 20 페이지. 2020 kia forte5 (smart key)

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

For

Convenience-Only

programming, see next section.

Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles

equipped with a manual transmission, make sure the gearshift lever is in the neutral position

The harnesses must be connected in this exact order:

Connect the 14-pin.

Connect the 12-pin.

Connect the 10-pin.

When the LED turns on solid red, proceed with the next step.

Press twice (2x) on the Push-to-Start (PTS) button to turn the ignition on.

The LED will flash orange quickly.

The LED turns on solid green for 3 seconds, then turns off.

Press the PTS button once more to turn the ignition OFF.

You have successfully completed the module programming sequence.

403.KIA8 1.07 2020 Kia Forte5 (Smart Key)