Directed DB3 403.KIA8 Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільні аксесуари Directed DB3 403.KIA8. Directed DB3 403.KIA8 20 сторінок. 2020 kia forte5 (smart key)
Друкувати сторінку
Module programming
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
For
Convenience-Only
programming, see next section.
Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles
1
equipped with a manual transmission, make sure the gearshift lever is in the neutral position
The harnesses must be connected in this exact order:
Connect the 14-pin.
1.
2
2.
Connect the 12-pin.
3.
Connect the 10-pin.
When the LED turns on solid red, proceed with the next step.
Press twice (2x) on the Push-to-Start (PTS) button to turn the ignition on.
3
The LED will flash orange quickly.
The LED turns on solid green for 3 seconds, then turns off.
4
5
Press the PTS button once more to turn the ignition OFF.
You have successfully completed the module programming sequence.
10
403.KIA8 1.07 2020 Kia Forte5 (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.