Clark Synthesis TST239 설치 매뉴얼 - 페이지 8

{카테고리_이름} Clark Synthesis TST239에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clark Synthesis TST239 20 페이지. Platinum, gold, silver and all weather transducers
Clark Synthesis TST239에 대해서도 마찬가지입니다: 보충 설명서 (4 페이지), 설치 매뉴얼 (8 페이지), 데이터시트 (1 페이지), 구매자 매뉴얼 (2 페이지), 설치 매뉴얼 (20 페이지), 사양 (1 페이지)

페이지 인쇄

Installation: Chairs & Couches

As a general rule, most chairs and couches have an underlying wooden frame. The Transducer

can be mounted directly to a frame member or to a hardwood bridge that is rigidly secured

to chair or couch's bottom frame. The bridge should be at least 3/4" thick and cut to span the

two frame members or connect two sides of a box frame. The more centrally located the frame

member or bridge is on the overall structure, the better the distribution of tactile sound.

For best results, the Transducer should be parallel to the ground (horizontal) so that the motion

is up and down as opposed to side to side. The Transducer can be mounted to either the top or

bottom of the bridge. When attaching the Transducer to the top of the bridge, be sure that the

Transducer and the wiring does not interfere with any recliner mechanism. When attaching the

Transducer to the bottom of the bridge, be sure that the Transducer does not touch the floor.

A chair or couch with armrests is preferred since a significant amount of tactile sensation is felt in

the hands and arms.

Hardwood Bridge (min. 3/4" thick)

Transducer mounted

under the bridge

over the bridge

Tactile Sound Transducers