Caliber 13576 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Caliber 13576에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caliber 13576 10 페이지. Sled wheels
Caliber 13576에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (8 페이지)

5. Slide the Saddle/Latch assemblies (5) over the Telescoping Handles (9) with the latch side first. Slip a ¼" square

nut (15) into the Telescoping Handle T-slot, and secure with a ¼-20 x 1.5" screw (11), and a ¼" washer (16). Use

Table 2 to find the location of the saddle for your ski. Move the saddle to the correct location per the table. The

image below shows a saddle at 4". If your ski is not in the table, the saddle/latch should be at about 7", and will

be adjusted later. Leave the safety pin out of its hole in the latch.

- Page 4 -

Assembled on May 19, 2020

CI05067, rev E