Caliber 13576 Montagehandleiding - Pagina 4
Blader online of download pdf Montagehandleiding voor {categorie_naam} Caliber 13576. Caliber 13576 10 pagina's. Sled wheels
Ook voor Caliber 13576: Montagehandleiding (8 pagina's)
Pagina afdrukken5. Slide the Saddle/Latch assemblies (5) over the Telescoping Handles (9) with the latch side first. Slip a ¼" square
nut (15) into the Telescoping Handle T-slot, and secure with a ¼-20 x 1.5" screw (11), and a ¼" washer (16). Use
Table 2 to find the location of the saddle for your ski. Move the saddle to the correct location per the table. The
image below shows a saddle at 4". If your ski is not in the table, the saddle/latch should be at about 7", and will
be adjusted later. Leave the safety pin out of its hole in the latch.
- Page 4 -
Assembled on May 19, 2020
CI05067, rev E