Caliber 13579 조립 지침 매뉴얼 - 페이지 9

{카테고리_이름} Caliber 13579에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caliber 13579 10 페이지. Sled wheels
Caliber 13579에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (8 페이지)

Attach to skis:

1. Grab one Sled Wheel assembly by the handle, hold it vertically, and slide the fingers under the ski until the wheel

axles are in line with the spindle axle. You may need to lift the ski loop to create space under the ski. Rotate the

assembly down to raise the ski until the latch closes around the ski loop. Install and lock the safety pin. Repeat

for the second ski.

Caution: Do not exceed 12 miles per hour while driving on Sled Wheels.

Detach from skis:

1. Remove safety pin from latch. Push down on handle to remove the weight of the snowmobile, and push the latch

lever to release the ski loop.

2. Slowly move the handle up. Remove Sled Wheels from the ski, lifting the ski loop if necessary. Close latch and

replace safety pin. Store fully assembled, ready for your next ride!

- Page 9 -

Assembled on May 19, 2020

CI05067, rev E