Caliber 13579 Instrukcja montażu - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akcesoria samochodowe Caliber 13579. Caliber 13579 10 stron. Sled wheels
Również dla Caliber 13579: Instrukcja montażu (8 strony)

Drukuj stronę

Attach to skis:

1. Grab one Sled Wheel assembly by the handle, hold it vertically, and slide the fingers under the ski until the wheel

axles are in line with the spindle axle. You may need to lift the ski loop to create space under the ski. Rotate the

assembly down to raise the ski until the latch closes around the ski loop. Install and lock the safety pin. Repeat

for the second ski.

Caution: Do not exceed 12 miles per hour while driving on Sled Wheels.

Detach from skis:

1. Remove safety pin from latch. Push down on handle to remove the weight of the snowmobile, and push the latch

lever to release the ski loop.

2. Slowly move the handle up. Remove Sled Wheels from the ski, lifting the ski loop if necessary. Close latch and

replace safety pin. Store fully assembled, ready for your next ride!

- Page 9 -

Assembled on May 19, 2020

CI05067, rev E