Clarke 6500005 운영 및 유지 관리 지침 - 페이지 6

{카테고리_이름} Clarke 6500005에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6500005 19 페이지. Mortising machine

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through

an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code

As the colours of the flexible lead of this appliance may not correspond with the

coloured markings identifying terminals in your plug proceed as follows:

•

Connect GREEN & YELLOW coloured cord to plug terminal marked with a

letter "E" or Earth symbol "

•

Connect BROWN coloured cord to plug terminal marked with a letter "L" or

coloured RED.

•

Connect BLUE coloured cord to plug terminal marked with a letter "N" or

coloured BLACK.

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.

non-rewirable) please note:

The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

Never use the plug without the fuse cover fitted.

Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

Fuse Rating

The fuse in the plug must be replaced with one of the same rating (13 amps) and

this replacement must be ASTA approved to BS1362.

Important: If a cable extension is needed, it is essential to comply with the following

data.

Extension length

WARNING! THIS APPLIANCE MUST BE EARTHED

Green & Yellow ........................ Earth

Blue ............................................ Neutral

Brown ........................................ Live

Up to 20m ....................................... 2.5mm

From 20 to 50m .............................. 4mm

" or coloured GREEN or GREEN & YELLOW.

Cable section