Clarke 6500005 Instruções de funcionamento e manutenção - Página 6
Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Ferramenta eléctrica Clarke 6500005. Clarke 6500005 19 páginas. Mortising machine
Imprimir página
ELECTRICAL CONNECTIONS
Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through
an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code
As the colours of the flexible lead of this appliance may not correspond with the
coloured markings identifying terminals in your plug proceed as follows:
•
Connect GREEN & YELLOW coloured cord to plug terminal marked with a
letter "E" or Earth symbol "
•
Connect BROWN coloured cord to plug terminal marked with a letter "L" or
coloured RED.
•
Connect BLUE coloured cord to plug terminal marked with a letter "N" or
coloured BLACK.
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.
non-rewirable) please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
Fuse Rating
The fuse in the plug must be replaced with one of the same rating (13 amps) and
this replacement must be ASTA approved to BS1362.
Important: If a cable extension is needed, it is essential to comply with the following
data.
Extension length
WARNING! THIS APPLIANCE MUST BE EARTHED
Green & Yellow ........................ Earth
Blue ............................................ Neutral
Brown ........................................ Live
Up to 20m ....................................... 2.5mm
From 20 to 50m .............................. 4mm
" or coloured GREEN or GREEN & YELLOW.
Cable section
6
2
2