Clarke 7614052 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke 7614052에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 7614052 17 페이지. 20 tonne hydraulic press

ASSEMBLY

The press must be firmly secured to a solid level floor such as concrete, using

expansion bolts (not supplied). Holes are provided in the foot sections for this

purpose. Do not locate your press where it will be open to the elements, as

harsh weather conditions will damage the hydraulic parts.

Due to the weight of the components, we recommend that the press is

assembled by two people.

1. Attach the feet and the bottom

cross member to the side

supports, using the M12 nuts, bolts

and washers.

2. Add the foot braces to each side

using the remaining M10 nuts,

bolts and washers.

3. Bolt the cross beam to the side

supports, securing it with the M16

bolts, nuts and washers.

• Assemble loosely before

tightening all fastenings.

4. With the help of an assistant,

manoeuvre the frame to its

intended location in the

workshop.

5. Fix the 2x hooks to the moving

cross beam using the nuts

supplied. Take the two springs and

hook them to their positions on the

moving beam. Support the

moving beam and attach the

other end of the springs to the

cross beam.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]