Clarke 7614052 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke 7614052에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 7614052 17 페이지. 20 tonne hydraulic press

6. Take the bottle jack unit, and by

pressing down on the moving

cross beam against the resistance

of the springs, manoeuvre the

jack so that the jack ram sits in the

socket below the cross beam.

7. Using the small hex bolt and nut,

secure the jack to the beam.

• The jack will remain self-centred

during use.

Bolt the two halves of the pressing

bed together using the long bolts

with nuts and spacer tubes supplied.

8. Insert the bed support pins into

the holes in the side support at a

height of your choosing. Then

lower the pressing bed onto the

pins.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]