Clarke CAT113 조립 및 사용 설명서 - 페이지 8

{카테고리_이름} Clarke CAT113에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CAT113 13 페이지. Cut off tool

MAINTENANCE

WARNING: DISCONNECT TOOL FROM AIR SUPPLY BEFORE CHANGING

ACCESSORIES, SERVICING OR PERFORMING MAINTENANCE. REPLACE

OR REPAIR DAMAGED PARTS. USE GENUINE CLARKE PARTS ONLY. NON-

AUTHORISED PARTS MAY BE DANGEROUS

1. Lubricate the air tool daily by placing a few drops of air tool oil into the air

inlet.

Loss of power or erratic action may be due to the following:

a. Excessive usage on the air

line.

b. Moisture or restriction in the air

pipe.

c. Incorrect size or type of hose

connectors.

d. Grit or gum deposits in the

tool may also reduce

performance.

e. Check and clean the gauze

filter (located in the air inlet).

If the tool runs erratically or becomes inefficient, and the air supply is sound,

take the tool to your CLARKE dealer.

STORAGE

If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of

Clarke air line oil into the air inlet, and run the tool for 5 seconds in order to

lubricate the internal parts.

1. When not in use, disconnect from air supply, clean tool and store in a safe,

dry place.

Gauze Filter

(located here)