aerauliqa QR590E 설치 매뉴얼 - 페이지 15
{카테고리_이름} aerauliqa QR590E에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aerauliqa QR590E 20 페이지. Energy recovery ventilation unit with enthalpic heat exchanger
8 maINtENaNcE aND sErvIcE
Make sure that specific warnings and cautions in Chapter 2 "Precautions" are carefully read, understood and applied!
Maintenance can be carried out by the user.
Service must be performed only by an authorized installer and in accordance with local rules and regulations.
Questions regarding installation, use, maintenance and service of the unit should be answered by your installer or place of
purchase!
8.1 Components list
4
6
1
2
Fig. 8.a Internal components
8.2 Description of Components
Fans
The fans have external rotor motors of EC type which can be steplessly controlled individually between 10–100%. The motor
bearings are life time lubricated and maintenance free. It is possible to easily disconnect and replace the fans if necessary.
Filters
The filters are of filter quality G4 for both the supply air and extract air filter. In addition an F7 Filter is supplied at the air intake.
The filters need to be cleaned regularly (and replaced when polluted) during maintenance. New sets of filters can be acquired
from your installer or wholesaler.
Heat exchanger
The unit is equipped with an enthalpic heat exchanger, suitable to transfer thermal energy and humidity from one airflow to the
other. The heat exchanger is removable for cleaning and maintenance during service.
Thermistors
Temperature probes to implement temperature dependent functions.
WARNING
3
G4 FILTER
1
2
F7 FILTER
3
HEAT ExCHANGER
4
THERMISTOR
5
FAN, INTAKE AIR
6
FAN, ExHAUST AIR
7
ELECTRICAL CONNECTION BOx
7
8
CABLE ENTRY
5
8
15