Clarke CPSB100 운영 및 유지보수 지침 매뉴얼 - 페이지 8

{카테고리_이름} Clarke CPSB100에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPSB100 20 페이지. Pressurised sandblaster

OPERATION

WARNING: ALWAYS WEAR YOUR HOOD, DUST MASK AND HEAVY DUTY

CANVAS GLOVES WHEN OPERATING THE SANDBLASTER.

WARNING: BEFORE OPERATING YOUR SANDBLASTER, INSPECT EACH

CONNECTION, DOUBLE CHECKING TO MAKE SURE THAT ALL ARE TIGHT

AND PROPERLY SEALED.

WARNING: THIS SANDBLASTER IS NOT INTENDED FOR USE WITH SILICA BASED

ABRASIVES. WHICH HAVE BEEN LINKED TO SEVERE RESPIRATORY DISEASE.

ALWAYS USE SILICA SUBSTITUTES (SUCH AS CLARKE GLASS BEAD ABRASIVE.

• Before opening tank make sure that it is not pressurized. Ensure the

gauge reads "0". If it does not, release pressure from the tank (See

page 11).

• Disconnect the compressor before opening the tank. Protect

yourself and those around you from "over-spray". Remember that

your portable abrasive blaster is shooting a powerful spray of

abrasive material. Do not point it at yourself or anyone around you.

• Wear protective clothing including hood (30), and heavy gloves

when using this abrasive blaster.

• Wear a filter or mask over your mouth when using this tool. You will

create a cloud of abrasive material and debris which is dangerous

to inhale.

• Protect anything around you that may be damaged from the

abrasive spray or particles. Nothing subject to contamination

damage or with a fine surface should be near your abrasive

blaster.

The kind of abrasive you choose will greatly influence the amount of time

needed to clean a given surface area.