Clarke DHC-2 운영 및 유지보수 지침 매뉴얼 - 페이지 7
{카테고리_이름} Clarke DHC-2에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke DHC-2 9 페이지. Double headed metal nibbler
페이지 인쇄
CHANGING THE CUTTER
1.
Loosen the cutter guide fixing screws using the hex key.
2.
Lift out the coil spring and cover shown in the picture and
loosen the fixing screw and nut.
3.
Slide out the cutter.
4.
Replace with a new cutter and retighten the fixing screw and
nut using the hex key supplied.
•
The fixing nut locks into the indentation on the cutter.
5.
Replace the cover and coil spring
6.
Refit the cutter guide.
7
Fig. 6
Fig. 7