Clarke Strong-Arm CSA15F 운영 및 유지 관리 지침 - 페이지 3

{카테고리_이름} Clarke Strong-Arm CSA15F에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Strong-Arm CSA15F 12 페이지. 15 tonne shop press

SAFETY PRECAUTIONS

• Always use lifting equipment when lifting or moving the shop press.

• Ensure the press is located on firm level ground with adequate light.

• Before applying a load, be certain that all press bed support pins are fully

engaged, and the hydraulic ram is fully located into the ram mount.

Ensure also that hydraulic hoses and couplings are completely sound.

• Before use, make sure that the workpiece is secure and stable.

• Always clean spills of hydraulic oil immediately as this can be extremely

dangerous in a workshop environment.

• Do not allow any inexperienced person to use the machine unless they

are under direct supervision.

• Do not allow anyone to work in front of the machine during use.

• Never tamper with the machine. The safety valve is calibrated and

sealed at the factory, do not attempt to change these settings.

• Use ONLY the recommended hydraulic oil specified on page

• Do not substitute bolts, pins, or any other components.

• Always apply the load on the centre of ram plunger. Offset loads can

damage the ram or ram mount and may cause work piece to be

ejected.

• Before operating, check for signs of cracked welds, bent bed pins, loose

or missing bolts, or any structural damage. Do not operate if any of these

defects exist. Have all repairs made by your Clarke dealer.

• Remove all loads from work bed before attempting to adjust the work

bed height.

• Press only on a work piece supported by the work bed.

• When using arbor plates, mare sure that they are centred on work bed,

and are in full contact with the bed.

• Objects being pressed may splinter, shatter, or be ejected from the press.

Always use adequate guards and wear eye protection and heavy

protective clothing when operating this shop press.

• Keep hands and fingers away from all moving parts.

• It is the owners responsibility to keep warning labels legible and intact.

Replacements are available from your Clarke dealer.

• Failure to heed these warnings may result in damage to the equipment,

or failure resulting in property damage, personal, or even fatal injury.

• DO NOT use extension tubes on the pump handle.

12.