Clarke Strong-Arm CSA15F Instruções de funcionamento e manutenção - Página 3
Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Ferramenta eléctrica Clarke Strong-Arm CSA15F. Clarke Strong-Arm CSA15F 12 páginas. 15 tonne shop press
Imprimir página
SAFETY PRECAUTIONS
• Always use lifting equipment when lifting or moving the shop press.
• Ensure the press is located on firm level ground with adequate light.
• Before applying a load, be certain that all press bed support pins are fully
engaged, and the hydraulic ram is fully located into the ram mount.
Ensure also that hydraulic hoses and couplings are completely sound.
• Before use, make sure that the workpiece is secure and stable.
• Always clean spills of hydraulic oil immediately as this can be extremely
dangerous in a workshop environment.
• Do not allow any inexperienced person to use the machine unless they
are under direct supervision.
• Do not allow anyone to work in front of the machine during use.
• Never tamper with the machine. The safety valve is calibrated and
sealed at the factory, do not attempt to change these settings.
• Use ONLY the recommended hydraulic oil specified on page
• Do not substitute bolts, pins, or any other components.
• Always apply the load on the centre of ram plunger. Offset loads can
damage the ram or ram mount and may cause work piece to be
ejected.
• Before operating, check for signs of cracked welds, bent bed pins, loose
or missing bolts, or any structural damage. Do not operate if any of these
defects exist. Have all repairs made by your Clarke dealer.
• Remove all loads from work bed before attempting to adjust the work
bed height.
• Press only on a work piece supported by the work bed.
• When using arbor plates, mare sure that they are centred on work bed,
and are in full contact with the bed.
• Objects being pressed may splinter, shatter, or be ejected from the press.
Always use adequate guards and wear eye protection and heavy
protective clothing when operating this shop press.
• Keep hands and fingers away from all moving parts.
• It is the owners responsibility to keep warning labels legible and intact.
Replacements are available from your Clarke dealer.
• Failure to heed these warnings may result in damage to the equipment,
or failure resulting in property damage, personal, or even fatal injury.
• DO NOT use extension tubes on the pump handle.
3
12.