Zanussi ZRB934PW 사용자 설명서 - 페이지 8

{카테고리_이름} Zanussi ZRB934PW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZRB934PW 12 페이지. Zanussi refrigerator user manual

The appliance is supplied with a 13 amp plug fitted

. In the event of having to change the fuse in the

plug supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

Warning! A cut off plug inserted into a 13 amp

socket is a serious safety (shock) hazard. Ensure

that it is disposed of safely.

Rear spacers and levelling

In the bag with the docu-

mentation, there are two

spacers which must be fit-

ted as shown in the figure.

Slacken the screws and in-

sert the spacer under the

screw head, then tighten

again the screws.

m1 m2

m5 m6

When placing the appli-

ance ensure that it stands

level. This can be ach-

ieved by two adjustable

feet at the bottom in front.

Removing the shelf holders

Your appliance is equipped with shelf retainers that

make it possible to secure the shelves during transpor-

tation.

To remove them proceed

as follows:

1. Move the shelf hold-

ers in the direction of

the arrow (A).

2. Raise the shelf from

the rear and push it

forward until it is

freed (B).

3. Remove the retainers

(C).

Door reversibility

Warning! Before carrying out any operations,

remove the plug from the power socket.

Important! To carry out the following operations, we

suggest that this be made with another person that will

keep a firm hold on the doors of the appliance during

the operations.