Clarke X-Pro CAT199 운영 및 유지 관리 지침 - 페이지 7

{카테고리_이름} Clarke X-Pro CAT199에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke X-Pro CAT199 17 페이지. 1/2" air ratchet wrench

BEFORE USE

WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU

ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR

COMPRESSORS AND COMPRESSED AIR SUPPLY.

NOTE: Ensure the compressor is turned off.

1. Remove the travel plug and connect either a suitable hose directly or

using the male adaptor supplied.

2. If required, connect an in-line mini

oiler to the tool.

• A mini oiler helps to prolong the

life of any air tool.

3. If a mini-oiler is not being used, run

a few drops of oil through the tool

before use. It can be entered

through the airline connector or

via the hose at the nearest

connection to the air supply.

4. Connect the other end of the hose

to the compressor.

5. Turn on the air supply and check

for air leaks. Rectify any found

before proceeding. Set the

working pressure to 90psi/6.2 bar

for best performance

• PTFE tape may be useful for

sealing threaded connections.

Your air tool is now ready for use.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]