Clarke X-Pro CAT199 Gebruiks- en onderhoudsinstructies - Pagina 7
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Clarke X-Pro CAT199. Clarke X-Pro CAT199 17 pagina's. 1/2" air ratchet wrench
Pagina afdrukken
BEFORE USE
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR
COMPRESSORS AND COMPRESSED AIR SUPPLY.
NOTE: Ensure the compressor is turned off.
1. Remove the travel plug and connect either a suitable hose directly or
using the male adaptor supplied.
2. If required, connect an in-line mini
oiler to the tool.
• A mini oiler helps to prolong the
life of any air tool.
3. If a mini-oiler is not being used, run
a few drops of oil through the tool
before use. It can be entered
through the airline connector or
via the hose at the nearest
connection to the air supply.
4. Connect the other end of the hose
to the compressor.
5. Turn on the air supply and check
for air leaks. Rectify any found
before proceeding. Set the
working pressure to 90psi/6.2 bar
for best performance
• PTFE tape may be useful for
sealing threaded connections.
Your air tool is now ready for use.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7