Zanussi ZOD370 사용자 설명서 - 페이지 7
{카테고리_이름} Zanussi ZOD370에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZOD370 28 페이지. Oven
Zanussi ZOD370에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)
페이지 인쇄
Clock Functions
• Countdown
- See appropriate chapter on setup. A
signal sounds after the time has elapsed. This function
does not affect the functioning of the oven.
• Cook time
- is used to set the desired period of
cooking time.
• End time
- when set the appliance is turned off
at desired time.
• Time
- shows the current time.
How to use the clock functions
• After a function has been selected, the corresponding
function indicator flashes for about 5 seconds. During
this period, the desired times can be set using the in-
crease
or decrease
• When the desired time has been set, the function in-
dicator continues to flash for approx. 5 seconds. After
that the function indicator is then lit. The set time be-
gins to run.
• Press any of the buttons to stop the audible signal.
• The desired oven function and temperature can be se-
lected before or after the clock functions Cook time
and End time
• When the cooking process is completed, turn the oven
function dial and the temperature selector back to the
OFF position.
Countdown
1. Press the Mode
tion indicator Countdown
2. Using the increase
desired Countdown (max. 2 hours 30 minutes).
3. After approx. 5 seconds the display shows the time
remaining. The function indicator Countdown
lights up.
Use, tables and tips
Baking
Oven levels
• Baking with Conventional Cooking is only possible on
one level.
• When baking with Fan Cooking one to two baking trays
can be put into the bottom oven at the same time:
button.
are set.
button repeatedly until the func-
flashes.
or decrease
button set the
4. When the time has elapsed, the function indicator
flashes and an audible signal sounds for 2 minutes.
The signal can be stopped by pressing any button.
Cook time
1. Press the Mode
tion indicator Cook time
2. Using the increase
desired cooking time.
After approx. 5 seconds the display returns to show-
ing the current time. The function indicator Cook time
lights up.
When the time has elapsed, the function indicator
flashes, an audible signal sounds for 2 minutes and
the oven switches itself off.
3. The signal and the programme can be stopped by
pressing any button.
End time
1. Press the Mode
tion indicator End time
2. Using the increase
desired switch-off time.
After approx. 5 seconds the display returns to show-
ing the current time. The function indicator End time
lights up.
When the time has elapsed, the function indicator
flashes, an audible signal sounds for 2 minutes and
the oven switches itself off.
3. The signal and the programme can be stopped by
pressing any button.
button repeatedly until the func-
flashes.
or
decrease button set the
button repeatedly until the func-
flashes.
or
decrease button set the
7