Zanussi ZZB35901XA 사용자 설명서 - 페이지 17

{카테고리_이름} Zanussi ZZB35901XA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZZB35901XA 25 페이지.
Zanussi ZZB35901XA에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지)

4. Put the door on a soft cloth on a stable surface.

5. Release the locking system to remove the

internal glass panel.

6. Turn the two fasteners by 90° and remove them

from their seats.

90°

7. First lift carefully and then remove the glass

panel.

8. Clean the glass panel with water and soap. Dry

the glass panel carefully.

When the cleaning is completed, install the glass

panel and the oven door. Do the above steps in the

opposite sequence.

The screen-printing zone must face the inner side

of the door. Make sure that after the installation the

surface of the glass panel frame on the screen-

printing zones is not rough when you touch it.

Make sure that you install the internal glass panel in

the seats correctly.

REPLACING THE LAMP

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING! Danger of electrocution!

Disconnect the fuse before you

replace the lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C heat-

resistant lamp.

4. Install the glass cover.