Zanussi ZZB35901XA Kullanıcı Kılavuzu - Sayfa 17
Fırın Zanussi ZZB35901XA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZZB35901XA 25 sayfaları.
Ayrıca Zanussi ZZB35901XA için: Kullanıcı Kılavuzu (25 sayfalar)
4. Put the door on a soft cloth on a stable surface.
5. Release the locking system to remove the
internal glass panel.
6. Turn the two fasteners by 90° and remove them
from their seats.
90°
7. First lift carefully and then remove the glass
panel.
8. Clean the glass panel with water and soap. Dry
the glass panel carefully.
When the cleaning is completed, install the glass
panel and the oven door. Do the above steps in the
opposite sequence.
The screen-printing zone must face the inner side
of the door. Make sure that after the installation the
surface of the glass panel frame on the screen-
printing zones is not rough when you touch it.
Make sure that you install the internal glass panel in
the seats correctly.
REPLACING THE LAMP
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING! Danger of electrocution!
Disconnect the fuse before you
replace the lamp.
The lamp and the lamp glass cover
can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover counterclockwise to
remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
2
1
A
17