Zanussi FE 904 NN 사용자 설명서 - 페이지 15

{카테고리_이름} Zanussi FE 904 NN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi FE 904 NN 22 페이지. Washing machine fe 904 nn

페이지 인쇄

1. Control Panel

7. Select the SPIN SPEED

SPIN SUPPRESSION

HOLD option

Press the SPIN SPEED button

order to select the desired spin speed, SPIN

SUPPRESSION option

option

. The relevant light will light up.

If you select the RINSE HOLD option

machine will stop at the end of the programme with

the water still in the tub.

8. Select the desired options

If your laundry is very dirty, it may be advisable to

select the PREWASH option

Select the ECONOMY option

only slightly soiled.

If you wish the laundry to undergo an extra rinse,

select the SUPER RINSE option

The relevant light illuminates.

Press the OPTIONS button so as to cause one light

to light up.

, the

or RINSE

repeatedly, in

or the RINSE HOLD

, the

, if your laundry is

9. Start the programme

Press the START/PAUSE button

light will stop flashing and only the light relevant to

the phase that is in progress will remain lit.

10. How to change a programme

during its cycle

Before you make any change, you must pause the

washing machine by pressing the START/PAUSE

button.

It is possible to change any phase before the

programme carries it out.

Changing the type of fabric or temperature is

possible, obviously, only during the washing phase.

When you make a change in these two parameters,

the washing machine will resume the cycle from the

beginning.

If it is necessary to drain the water in order to

change the programme in progress, proceed as

follows:

• PAUSE the machine by pressing the

START/PAUSE button;

• press the SKIP/RESET button

only the DRAIN light

• press the START/PAUSE button again.

When the water has been drained, you may select a

new programme and press the START/PAUSE

button to start it.

. The relevant

repeatedly, until

remains lit;