Zanussi FE 904 NN Manual do utilizador - Página 15
Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar roupa Zanussi FE 904 NN. Zanussi FE 904 NN 22 páginas. Washing machine fe 904 nn
Imprimir página
7. Select the SPIN SPEED
SPIN SUPPRESSION
HOLD option
Press the SPIN SPEED button
order to select the desired spin speed, SPIN
SUPPRESSION option
option
. The relevant light will light up.
If you select the RINSE HOLD option
machine will stop at the end of the programme with
the water still in the tub.
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option
Select the ECONOMY option
only slightly soiled.
If you wish the laundry to undergo an extra rinse,
select the SUPER RINSE option
The relevant light illuminates.
Press the OPTIONS button so as to cause one light
to light up.
, the
or RINSE
repeatedly, in
or the RINSE HOLD
, the
.
, if your laundry is
.
9. Start the programme
Press the START/PAUSE button
light will stop flashing and only the light relevant to
the phase that is in progress will remain lit.
10. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the washing machine will resume the cycle from the
beginning.
If it is necessary to drain the water in order to
change the programme in progress, proceed as
follows:
• PAUSE the machine by pressing the
START/PAUSE button;
• press the SKIP/RESET button
only the DRAIN light
• press the START/PAUSE button again.
When the water has been drained, you may select a
new programme and press the START/PAUSE
button to start it.
15
. The relevant
repeatedly, until
remains lit;