Zanussi DI 104B 사용 및 관리 지침 - 페이지 29

{카테고리_이름} Zanussi DI 104B에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi DI 104B 36 페이지. Dishwashers
Zanussi DI 104B에 대해서도 마찬가지입니다: 사용 지침 및 관리 매뉴얼 (36 페이지), 사용 설명서 지침 (36 페이지)

페이지 인쇄

Measure distance «a» between control

board and the reference notch on the door

(Fig. 20).

Fix the supporting transoms to the panel,

keeping the same distance «a» between

the upper edge of the panel itself and the

reference notch on the supporting

transom (Fig. 20). The center distance

between the tub transoms is 517 mm.

It is advisable to first fix the transoms by

means of flathead screws through the slot

holes only, and then to make a trial fitting

of the panel onto the door.

Installing the panel on the door

Install the panel by engaging the bottom

pins first (E), and then insert the top

hooks of the transoms into the hooks of

the door (D) as shown in Fig. 21.

Open the dishwasher door and check that

during its rotation the decorative panel

does not interfere with the control board.

In case of interference, increase the gap

between the control board and the

decorative panel by unscrewing the hooks

on the door (D).

As soon as the correct position has been

found, remove the decorative panel from

the dishwasher door, screw the supporting

transoms tight and then reinstall the

panel by going through the previously

described steps.