Zanussi ZGF 78 ICX 지침 책자 - 페이지 10

{카테고리_이름} Zanussi ZGF 78 ICX에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGF 78 ICX 11 페이지.

Installation and Assembly

These hobs can be installed in a kitchen unit with an

opening for insertion whose dimensions are shown in

Fig. 14.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 150 mm. as shown in Fig. 14.

Carry out the building in of the hob as follows:

•

put the relevant sealings, supplied with the

hob, on the edges of the cut out: place them

at 8 mm from the front and rear edge and at

50 mm from the side edges, as shown in Fig.

15, taking care that the sealings meet without

overlapping;

•

place the hob in the cut out, taking care of its

centring;

•

fix the hob with the relevant screws (Fig. 16). The

traction of the screws is able to trace the sealing, any

excess of which can then be easily removed.

The edge of the hob forms a double labyrinth seal which

provides a total guarantee against infiltration of liquids.

1 0

FO 2038

FO 0199

a) sealing

Fig. 14

Fig. 15

Fig. 16