Zanussi ZGG 659 지침 책자 - 페이지 11

{카테고리_이름} Zanussi ZGG 659에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGG 659 11 페이지. Zanussi cooktop user manual

Commissioning

When the hob has been fully installed it will be

necessary to check the minimum flame setting.

To do this, follow the procedure below.

- Turn the gas tap to the MAX position and ignite.

- Set the gas tap to the MIN flame position then

turn the control knob from MIN to MAX several

times. If the flame is unstable or is extinguished

follow the procedure below.

Procedure:

Re-ignite the burner and set to MIN.

Remove the control knob, insert a thin

bladed screwdriver down the centre of

the gas tap control shaft and turn the

adjustment screw until the flame is steady

and does not extinguish, when the knob

is turned from MIN to MAX. Repeat this

procedure for all burners.

Fig. 8

By-pass screw