Zanussi ZGG 659 지침 책자 - 페이지 9

{카테고리_이름} Zanussi ZGG 659에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGG 659 11 페이지. Zanussi cooktop user manual

Building in

Building over a cupboard or

drawer

If the hob is to be installed above a cupboard or

drawer it will be necessary to fit a heat resistant

board below the base of the hob on the underside

of the work surface.

Building over a kitchen unit with

door

Proper arrangements must be taken in designing

the furniture unit, in order to avoid any contact with

the bottom of the hob which can be heated when it

is operated. The recommended solution is shown

in diagram 1.

The panel fitted under the hob ("a") should be easily

removable to allow easy access if technical

assistance is needed. The space behind the

kitchen unit ("b") can be used for connections.

FO 1013

a) Removable panel

b) Room for connections

FO 0947

FO 0939

Building over a kitchen unit with

oven

If the hob is built into a kitchen unit with an oven

underneath, the recess must have the dimensions

shown in diagrams 2 and 3, and should also incor-

porate suitable oven crosspiece supports to ansure

an efficient cooling air circulation.

Diagrams 4 and 5 give two building-in examples.

The electric connection of the hob and the

oven should be carried out separately, for

electrical safety reasons to permit easy

extraction of the oven from the front part

of the kitchen unit.

FO 0198

FO 0938

550 min.