Zanussi ZGG 782 CT 지침 책자 - 페이지 19

{카테고리_이름} Zanussi ZGG 782 CT에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZGG 782 CT 32 페이지.

Fitting the Hob into the Worktop

Before fitting the hob into the cut out,

an adhesive seal must be fitted to the

underside outside edge of the hob.

It is essential that no gaps are left in

this seal in order to prevent spillage near

the hob seeping into the cabinet below.

1) Remove the pan supports, the burners

caps and crowns and turn the hob

upside down, taking care the ignition

candles are not damaged in this

operation.

2) Place the sealing gasket all around the

glass top edge as shown in Fig. 4.

3) Place the hob in the cut out, taking

care of its centring.

4) Fix the hob with the relevant fixing

clamps and screws(see Fig. 5). When

the screws have been tightened, the

excess seal can be removed.

FO 2320

FO 2321

Fig. 4

sealing gasket

Fig. 5