Zanussi ZKH 863 LX 설치 및 운영 지침 매뉴얼 - 페이지 10

{카테고리_이름} Zanussi ZKH 863 LX에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKH 863 LX 41 페이지. Ceramic glass hob

Zanussi ZKH 863 LX 설치 및 운영 지침 매뉴얼

Before Using for the First Time

Initial Cleaning

Wipe the ceramic glass surface with a damp cloth.
1
Important: Do not use any caustic, abrasive cleaners! The surface could be
damaged.

Operating the Hob

Touch control sensor panels

To operate the touch control sensor panels, touch the desired panel with the
tip of your pointed finger until the relevant displays illuminate or go out, or
until the desired function is carried out.
3
Ensure that you are only touching one sensor panel when operating the ap-
pliance. If you finger is too flat on the panel, the sensor panel below may be
actuated as well.

Switching on the appliance

The entire appliance is switched on using the "On/Off" sensor panel
Touch the "On/Off" sensor panel for approx. two seconds.
The digital displays will show ¾.
3
After the "On/Off" sensor panel has been actuated to switch on your appli-
ance, a cooking setting must be selected for a cooking zone within approx.
10 seconds, or a time must be set using the timer (egg timer function). If
not, the appliance will switch itself off again for reasons related to safety.
10
.