Zanussi ZKH 863 LX Посібник з монтажу та експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Варильна поверхня Zanussi ZKH 863 LX. Zanussi ZKH 863 LX 41 сторінка. Ceramic glass hob
Друкувати сторінку
Before Using for the First Time
Initial Cleaning
Wipe the ceramic glass surface with a damp cloth.
1
Important: Do not use any caustic, abrasive cleaners! The surface could be
damaged.
Operating the Hob
Touch control sensor panels
To operate the touch control sensor panels, touch the desired panel with the
tip of your pointed finger until the relevant displays illuminate or go out, or
until the desired function is carried out.
3
Ensure that you are only touching one sensor panel when operating the ap-
pliance. If you finger is too flat on the panel, the sensor panel below may be
actuated as well.
Switching on the appliance
The entire appliance is switched on using the "On/Off" sensor panel
Touch the "On/Off" sensor panel for approx. two seconds.
The digital displays will show ¾.
3
After the "On/Off" sensor panel has been actuated to switch on your appli-
ance, a cooking setting must be selected for a cooking zone within approx.
10 seconds, or a time must be set using the timer (egg timer function). If
not, the appliance will switch itself off again for reasons related to safety.
10
.