Zanussi ZKT 623 LX 작동 및 설치 지침 - 페이지 4

{카테고리_이름} Zanussi ZKT 623 LX에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 623 LX 23 페이지. Elektric ceramic glass hob

페이지 인쇄

Important Safety Information

The safety of this appliance corresponds to the

acknowledged rules of technique and to the law on

appliance safety. The safety measures existing as a

matter of self-understanding would, however, not cover

all of possible risks of accidents.

Moreover, we feel compelled as the manufacturer to

make you familiar with the following hints on safety.

Electrical safety

This appliance must be installed by qualified

personnel.

Repairs to the appliance should only be carreid

out by authorised service enginneers. Improper

repairs can lead to injury or serious malfunction.

If your appliance need repairing please contact

your local Service Force Centre.

Please observe this instruction, otherwise the

guarantee will not cover any damage that may

occur.

Built--in appliances must be installed in built--in

cupboards and worktops. The cupboards have to

be located and fastened in a way that they are sta-

ble. The protection against accidental contact re-

quired by the VDE will then be ensured.

Damaged appliances must not be installed.

Do not use the hob if the ceramic glass is dama-

ged:

- switch off the cooking zones,

- disconnect from the electricity supply.

A special electronically controlled safety--switch--

off makes sure that all cooking zones are swit-

ched off automatically after a defined time, in case

there will be no variation of settings.

Safety for children

This appliance is designed to be operated by

adults only. Do not allow children to play with the

product or tamper with the controls.

This hob is fitted with a safety device of the elec-

tronic control which prevents playing children

from turning the hob.

Safety during use

This hob is intended for domestic cooking only. It

is not designed for commercial or industrial

purposes.

The appliance gets hot when in use. In case of ca-

reless handling there is danger of burning one-

self at the heating zones.

Do not use the cooking zones to heat the room.

Take care when plugging electrical items into

mains sockets near the hob. Connecting leads

must not come into connection with the hot

surface or vessels.

Hot oils can ignite very quickly. Do not leave the

hob unattended when preparing foods in pans of

oil, i.e. frying chips.

The sensor technique provides best--possible sa-

fety with the manipulation of the appliance, but to

the same extent it needs care when setting coo-

king zones, output or periods of time.

After use make sure that the appliance is

switched off.

Safety when cleaning

Ensure that all heating zones are switched off

while cleaning the hob.

For safety reasons do not clean the appliance with

a steam jet or high pressure cleaner.

How to avoid damaging your appliance

Do not use the hob surface as a working surface

or for storage.

Do not use the cooking zones with empty pans or

without pans. This could cause damage to the

pans or the hob.

Ceramic glass is insensitive to temperature shock

and very robust, however, it is not unbreakable.

Hard and sharp objects, in particular, can damage

the cooking surface if they fall on it.

Do not use cast iron pots or pans with damaged

bases that are rough or burred. Scratching may

occur when the lids are slid.

Do not place any pans on the hob frame. Scrat-

ching may occur or the paint damaged.

Ensure that liquids containing acids, e.g. vinegar,

lemon limescale removing agents do not come

into contact with the hob frame, otherwise matt

spots will appear.

If sugar or a dish containing sugar comes into con-

tact with a hot cooking zone and then melts, re-

move the soiling immediately whilst still warm,

using a glass scraper. If it cools, damage to the

surface may occur.

Keep all items and materials that melt away from

the ceramic glass surface, e.g. plastics, alumi-

nium foil or oven foils. If something of this nature

should melt onto the ceramic glass surface, it

must be removed immediately using a glass scra-

per.