Zanussi ZKT 623 LX 작동 및 설치 지침 - 페이지 10

{카테고리_이름} Zanussi ZKT 623 LX에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKT 623 LX 23 페이지. Elektric ceramic glass hob

페이지 인쇄

Residual heat indicator

After switching off a single cooking zone or the entire

hob any residual heat is indicated by

in the display of the corresponding cooking zone.

Even after switching off a cooking zone the residual

heat indicator will go out only after sufficient cooling

down of the cooking zone.

The residual heat can be used for the melting and

keeping dishes warm.

Caution! While the

and there is a risk of burning.

Caution! If there is a power failure the

out even if there is residual heat in the hob. Care

will have to be taken until there is no longer a risk

of burning.

Child- -safety device

Acitivating the child- -safety device

The child--safety device prevents the cooking zones

being switched on accidentally.

The child--safety device can only be activated

when the hob is switched on.

1. Touch the

ON/OFF control.

2. Immediately after (within 10 seconds) touch the

and

controls at the same time for about two

seconds and then release.

3. Touch the

control again.

in the digital displays for about 10 seconds. The

child--safety device is now activated.

Use of the cooking area with the child- -safety devi-

activated

1. Touch the

ON/OFF control.

2. Within 10 seconds touch the

trols at the same time for about two seconds.

The digital displays show

flashes.

3. Select the cooking zone and set the heat set-

ting as desired.

The child--safety device remains deactivated until

you next switch off the apliance. All cooking zones

and settings can be used as normal.

("hot")showing

is illuminated the hob is hot

will go

will be indicated

and

con-

and the digital point