Zanussi ZXE66X 사용자 설명서 - 페이지 7
{카테고리_이름} Zanussi ZXE66X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZXE66X 12 페이지. Ceramic glass induction hob
![Zanussi ZXE66X 사용자 설명서](/uploads/products/server2/7124722/7124722.png)
Switching the outer ring on and off
You can match the effective heating surface to the size
of the cookware.
To switch on the outer ring touch the sensor field
The indicator comes on.
To switch off the outer ring touch the sensor field
again. The indicator goes out.
Automatic Heat Up
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This func-
tion sets the highest heat setting for some time (see the
graphic), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function:
1. Touch
.
comes on in the display.
2. Touch
again and again until
the display.
3. Immediately touch
essary heat setting comes on. After 3 seconds
comes on in the display.
To stop the function touch
Switching the Power function on and off
The Power function makes more power available to the
induction cooking zones. The Power function is activa-
ted for 10 minutes at most. After that the induction cook-
ing zone automatically switches back to the highest heat
setting. To switch on, touch
switch off, touch
or
4
5
6
7
8
comes on in
again and again until the nec-
.
,
comes on. To
.
Power management
.
The power management divides the power between two
cooking zones in a pair (see the figure). The power func-
tion increases the power to the maximum level for one
cooking zone in the pair and automatically decreases in
the second cooking zone to a lower power level. The dis-
play for the reduced zone alternates.
Using the Timer
Use the timer to set how long the cooking zone operates
for one cooking session.
9
Set the timer after the selection of the cooking zone.
You can set the heat setting before or after you set the
timer.
• Selection of the cooking zone: touch
again until the indicator of a necessary cooking zone
comes on.
• Starting or changing the timer: touch
the timer to set the time (
the indicator of the cooking zone flashes slower, the
time counts down.
• Stopping the timer: select the cooking zone with
and touch
time counts backwards to
cooking zone goes out.
• Checking the remaining time: select the cooking
zone with
es faster. Display shows the remaining time.
When the time elapses, the sound operates and
flashes. The cooking zone switches off.
• Stopping the sound: touch
You can use the timer as a minute minder while cook-
ing zones do not operate. Touch
00
99
-
minutes). When
to switch off the timer. The remaining
00
. The indicator of the
. The indicator of the cooking zone flash-
. Touch
again and
or
of
00
or
7