Zanussi ZXE66X Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Hob Zanussi ZXE66X. Zanussi ZXE66X 12 páginas. Ceramic glass induction hob

Imprimir página

Switching the outer ring on and off

You can match the effective heating surface to the size

of the cookware.

To switch on the outer ring touch the sensor field

The indicator comes on.

To switch off the outer ring touch the sensor field

again. The indicator goes out.

Automatic Heat Up

You can get a necessary heat setting in a shorter time if

you activate the Automatic Heat Up function. This func-

tion sets the highest heat setting for some time (see the

graphic), and then decreases to the necessary heat setting.

To start the Automatic Heat Up function:

1. Touch

comes on in the display.

2. Touch

again and again until

the display.

3. Immediately touch

essary heat setting comes on. After 3 seconds

comes on in the display.

To stop the function touch

Switching the Power function on and off

The Power function makes more power available to the

induction cooking zones. The Power function is activa-

ted for 10 minutes at most. After that the induction cook-

ing zone automatically switches back to the highest heat

setting. To switch on, touch

switch off, touch

comes on in

again and again until the nec-

comes on. To

Power management

The power management divides the power between two

cooking zones in a pair (see the figure). The power func-

tion increases the power to the maximum level for one

cooking zone in the pair and automatically decreases in

the second cooking zone to a lower power level. The dis-

play for the reduced zone alternates.

Using the Timer

Use the timer to set how long the cooking zone operates

for one cooking session.

Set the timer after the selection of the cooking zone.

You can set the heat setting before or after you set the

timer.

• Selection of the cooking zone: touch

again until the indicator of a necessary cooking zone

comes on.

• Starting or changing the timer: touch

the timer to set the time (

the indicator of the cooking zone flashes slower, the

time counts down.

• Stopping the timer: select the cooking zone with

and touch

time counts backwards to

cooking zone goes out.

• Checking the remaining time: select the cooking

zone with

es faster. Display shows the remaining time.

When the time elapses, the sound operates and

flashes. The cooking zone switches off.

• Stopping the sound: touch

You can use the timer as a minute minder while cook-

ing zones do not operate. Touch

minutes). When

to switch off the timer. The remaining

. The indicator of the

. The indicator of the cooking zone flash-

. Touch

again and