Zanussi ZBF22451SA 사용자 설명서 - 페이지 4

{카테고리_이름} Zanussi ZBF22451SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBF22451SA 16 페이지.
Zanussi ZBF22451SA에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (45 페이지)

Zanussi ZBF22451SA 사용자 설명서
• The appliance must not be located close to
radiators or cookers.
• Make sure that the mains plug is accessible
after the installation of the appliance.
• Connect to potable water supply only (If a
water connection is foreseen).
Service
• Any electrical work required to do the servic-
ing of the appliance should be carried out by
a qualified electrician or competent person.
• This product must be serviced by an author-
ized Service Centre, and only genuine spare
parts must be used.

Control panel

Display
1
Temperature warmer button
2
Temperature colder button
3
OK button
4
Mode button
5
ON/OFF button
6
Display
1
Off
Freezer OFF indicator
1
Fast Freeze function
2
Freezer temperature indicator
3
Freezer compartment indicator
4
Alarm indicator
5
Child Lock function
6
4
6
5
2
3
6
5
4
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in ei-
ther its refrigerant circuit or insulation materials.
The appliance shall not be discarded together
with the urban refuse and rubbish. The insula-
tion foam contains flammable gases: the appli-
ance shall be disposed according to the appli-
cable regulations to obtain from your local au-
thorities. Avoid damaging the cooling unit, espe-
cially at the rear near the heat exchanger. The
materials used on this appliance marked by the
symbol
are recyclable.
1
4
3
2
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power sock-
et.
2. Press the ON/OFF button if the display is
off.
3. The alarm buzzer may sound after a few
seconds.
To reset the alarm refer to "Door open
alarm".
If "DEMO" appears on the Display, the ap-
pliance is in demonstration mode: refer to
"Troubleshooting" paragraph.
4. The temperature indicators show the set
default temperature.
To select a different set temperature refer to
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
1. Press the ON/OFF button for 5 seconds.
2. The display switches off.
www.zanussi.com